Referto: How to Check Network Status of Reolink Cameras/NVRs. 2. If your camera is hardwired to the Reolink NVR, you can check the camera's IP address on the NVR via a monitor. See: How to Check Camera Status on IP Channel Page via Reolink NVR (New UI). 3. Check the device list on the router if no devices can still connect to this camera/NVR.
Setthe IP address of the PC and network camera to be on the same subnet. Enter the IP address of the network camera into the address bar of the web browser, and click Enter to enter the activation interface (Fig. 2-6). Fig. 2-4 Activation via Web Browser If there are two or more devices on the network, the IP addresses of devices should
Nowthat camera connect is complete, it is time to connect it the Hikvision NVR. Once connected, head over to Configuration -> Camera -> Locate the location of the camera you have connected -> Operation and then Edit. 1) Adding Method - Change from Plug & Play to Manual. 2) IP Camera Address - Change to IP Address of the Dahua Camera youQuickGuide:1. Open IP camera (don't give power)2. Push & *hold* Reset button with small wood stick3. Connect power supply 12V or PoE to the camera (don't re
Ihave also connected the IP camera on the LAN1 POE port of the NVR and I can see that the camera is connected and online in the NVR camera status page. But it seems that the camera has IP I now would like to change IP address of the camera in order to be able to reach it on my LAN but always connected on the LAN1 POE port of the NVR.
. 489 86 121 419 483 225 440 360